Advertisement

703568_Z1MANPRO1_AUS.indd 2
19/02/2015 11:07

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TA1200BS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Triton TA1200BS

  • Page 1 703568_Z1MANPRO1_AUS.indd 2 19/02/2015 11:07...
  • Page 2 Belt Sander 1200BS 76mm tritontools.com 703568_Z1MANPRO1_AUS.indd 2 19/02/2015 11:07...
  • Page 3 703568_Z1MANPRO1_AUS.indd 3 19/02/2015 11:07...
  • Page 4 703568_Z1MANPRO1_AUS.indd 4 19/02/2015 11:07...
  • Page 5: Description Of Symbols

    Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you fully understand the instructions.
  • Page 6: General Safety

    General Safety b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious c) Disconnect the plug from the power source and/or the battery pack injury.
  • Page 7: Product Familiarisation

    3. Lock-On Button Selecting the right grade of sanding belt 4. Main Handle • Different grades of sanding belt can be purchased from your local Triton 5. Drive Belt Cover stockist. Typical grades are: 6. Tracking Adjustment Knob Coarse (40 Grit), Medium (80 and 100 Grit), and Fine (120 Grit) 7.
  • Page 8: Operation

    (2). Using the inversion clamp set • The Inversion Clamp Set enables use of the Triton 76mm Belt Sander in an inverted position (Image H). The sander must only be used in an inverted position when clamped securely to a suitable structure with a solid, flat work surface 1.
  • Page 9: Maintenance

    • Inspect the supply cord of the tool, prior to each use, for damage or wear. Repairs should be carried out by an authorised Triton service centre. This advice also applies to extension cords used with this tool Cleaning Keep your tool clean at all times.
  • Page 10: Warranty Exclusions

    3 YEARS from the date of original purchase, www.tritontools.com* and enter your details. Triton will repair, or at its discretion replace, the faulty part free of Your details will be included on our mailing list (unless indicated other- wise) for information on future releases.
  • Page 11 Notes 703568_Z1MANPRO1_AUS.indd 6 19/02/2015 11:07...
  • Page 12 Notes 703568_Z1MANPRO1_AUS.indd 7 19/02/2015 11:07...

Table of Contents