1. Manuals
  2. Brands
  3. Middle Atlantic Products Manuals
  4. TV Mount
  5. VDM Series
  6. Instruction sheet

Middle Atlantic Products VDM Series Instruction Sheet

Full-motion display mount
Hide thumbs Also See for VDM Series:
Table of Contents

Advertisement

Quick Links

Download this manual
VDM-200-M
THANK YOU
Thank you for purchasing the Vision Display Full-Motion display mount.
Please read these instructions thoroughly before installing or assembling these products.
PRODUCT FEATURES
• Ideal for corner mount installs and single-person servicing
• Cable management built into arms to help maintain signal integrity and aesthetics
• Safety locking features keep the display securely mounted
• Arm extends 20"
• VESA Capability:
VDM-200-M 75x75mm - 200x200mm
VDM-400-M 75x75mm - 400x400mm
Instruction Sheet
VDM Series
Full-Motion Display Mount
VDM-400-M
I-00806
Rev B

Advertisement

Table of Contents
loading

Related Manuals for Middle Atlantic Products VDM Series

Summary of Contents for Middle Atlantic Products VDM Series

  • Page 1 Instruction Sheet VDM Series Full-Motion Display Mount VDM-200-M VDM-400-M THANK YOU Thank you for purchasing the Vision Display Full-Motion display mount. Please read these instructions thoroughly before installing or assembling these products. PRODUCT FEATURES • Ideal for corner mount installs and single-person servicing •...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS / INSTRUCTIONS IMPORTAANTES SUR LA SÉCURITÉ SAVE ALL INSTRUCTIONS / CONSERVER CES INSTRUCTIONS WARNING/AVERTISSEMENT and the exclamation point within an CAUTION/ATTENTION and the exclamation point within an equilateral triangle is intended to alert the user to the possibility of equilateral triangle is intended to alert the user to the possibility of serious injury or death if the instructions are not followed.

  • Page 3: Weight Ratings

    WEIGHT RATINGS Model Weight Rating VDM-200-M 50 lbs. Maximum Total Rated Load VDM-400-M 50 lbs. Maximum Total Rated Load REQUIRED TOOLS • #2 Phillips Screwdriver • Level • Power Drill • Protective Eyewear • 3/16” Wood Bit or 3/8” Masonary Bit •...
  • Page 4 SUPPLIED COMPONENTS (CONTINUED) Display Mount Screws M8 x 16 M8 x 20 M8 x 40 M6 x 12 M6 x 20 M6 x 30 M4 x 12 M4 x 20 M5 x 12 M5 x 30 (M-H) (M-J) (M-K) (M-E) (M-F) (M-G) (M-A)
  • Page 5 REMOVING DISPLAY MOUNT ARM FROM HORIZONTAL DISPLAY SUPPORT 1. Carefully remove the center wall cover as shown. (FIGURE A) FIGURE A 2. Use supplied hex wrench (E), loosen the top two flange nuts and remove the bottom nut. Tilt the bottom of display support out and slide up to remove it from the display mount arm as shown.
  • Page 6 ATTACHING MOUNT ARM TO A STUD (CONTINUED) 3. Use a 3/16” (4.5 mm) bit to drill pilot holes into the markings to a 2.2” (55 mm) depth. (FIGURE D) FIGURE D 4. Use (3x) hex head screws (G) and (3x) washers (M) to attach the mount arm to the studs as shown.
  • Page 7 ATTACHING THE MOUNT ARM TO A CONCRETE WALL (CONTINUED) 2. Use a 3/8” (10 mm) bit to drill pilot holes into the markings to a 2.4” (60 mm) depth. 60mm (2.4") ø 10mm (ø 3/8") 3. Use (4x) wall anchors (H), (4x) hex head screws (G), and (4x) washers (M) to attach the mount arm to the wall as shown.
  • Page 8 STOP The VDM-400-M display mount is supplied with a Proximity Series Mounting Plate PRX-MP-9X12. Before installing display mounting brackets to your display, follow the supplied mounting plate installation instructions I-00804 to find the best location for mounting your plate. Page 8...
  • Page 9 ATTACHING DISPLAY BRACKETS TO DISPLAY SUPPORT (400 ONLY) 1. Use a Phillips screwdriver and (8x) display bracket screws (N) to attach the (2x) left display brackets (C) and (2x) right display brackets (D) into one of the following configurations on the display support.
  • Page 10 ATTACHING DISPLAY SUPPORT TO DISPLAY (400 ONLY, CONTINUED) Attaching to a Raised or Recessed Back Display 1. Use (4x) washers (P or L), spacers (K or L) as desired, and (4x) display mount screws (M-A - M-K) to match the correct screw depth for your display and attach the display brackets on the display support to your display ensuring screw does not bottom out in mounting hole, or damage to display may occur.
  • Page 11 ATTACHING DISPLAY SUPPORT TO DISPLAY (200 ONLY, CONTINUED) Attaching to a Recessed Back Display 1. Use (4x) washers (P or R), small spacers (K) as desired, and (4x) display mounting screws (M-A - M-K) and attach the display support to your display ensuring screw does not bottom out in mounting hole, or damage to display may occur.
  • Page 12 ATTACHING DISPLAY SUPPORT TO MOUNT ARM (CONTINUED) 2. Use a level on top of the display and the supplied hex wrench (E), make any fine adjustments and tighten the top flange nuts as shown. (FIGURE R) FIGURE R 3. Attach and tighten the lower flange nut as shown. (FIGURE T) FIGURE T Page 12...

  • Page 13: Adjusting The Tilt

    CABLING 1. Remove display mount arm covers, run cables through the cover as desired, and then reattach the arm covers. (FIGURE U) ADJUSTING THE TILT 1. Loosen the upper levers and use the hex key (F) to loosen the hex cap screw to adjust the tilt on your display as shown.

  • Page 14: Warranty

    - customerservicecanada@middleatlantic.ca Factory Distribution USA: NJ - CA - IL Canada: ON - BC At Middle Atlantic Products we are always listening. Your comments are welcome. Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company. Page 14...

This manual is also suitable for:

Vdm-200-mVdm-400-m

Table of Contents