Summary of Contents for Middle Atlantic Products VTC-R1214
Page 1
Instruction Sheet VTC-R1214 Equipment Rack VTC Series THANK YOU Thank you for purchasing The VTC-R1214 equipment rack. PRODUCT FEATURES • 12 space / 14” depth equipment rack with glass front door and wood top. TOOLS REQUIRED • #2 Phillips Head Screwdriver •...
SUPPLIED HARDWARE 6-32 x 1/2” Pan Head 10 x 5/8” Wood Screw 1/4”-20 x 5/8 Hex Head Phillips Screws (Qty 4) Phillips Screws 10-32 x 3/8” Hex Head Screw (Qty 2) (Qty 2) (Qty 8) 6-32 x 1/4” Flat Head 6-32 x 3/8”...
INSTALLATION 1) Lock rear wheels. (FIGURE A) Hinge Screw Hinge Arm Push Lever To Lock FIGURE A FIGURE C 2) Remove front and rear access panels. 4) Push front hood hinge arm as shown to (FIGURE B) disengage arm from front hood. (FIGURE C) NOTE: If necessary, refer to Video Tele-Presence Center VTC Series Instruction NOTE: Lower hinge arm to prevent damage.
Page 4
INSTALLATION (Continued) 10) Align tab on bottom of front right trim panel 7) Install new cover plate on VTC in the reverse manner using (3) 6-32 x 1/4” flat head with slot on VTC and insert as shown. Phillips screws. (FIGURE E) (FIGURE H) Front Right 8) Install front door catch on either the right or...
Page 5
INSTALLATION (Continued) 15) Insert rack from rear, align with rear 13) Align tabs on bottom of rear trim panels with mounting holes in VTC, and secure using (2) slots on VTC and insert panels as shown. 1/4”-20 x 5/8” Phillips hex head screws. (FIGURE J) (FIGURE L, FIGURE M) NOTE: Remove squaring panels from rack...
Page 6
INSTALLATION (Continued) 18) Insert the metal tabs on the lower side of each 16) Slide rear horizontal trim over rear left and rear access panel into the slots. Close the right trim panels and secure using (2) 6-32 x panels by firmly pushing the top sides into 3/8”...
Page 7
INSTALLATION (Continued) 20) Remove adhesive strips from door press 23) Install door by pivoting lower hinge into plates and affix to upper and lower inside lower bushing on the VTC. (FIGURE U) corners of door. (FIGURE S) Door Press Plates FIGURE U FIGURE S 24) Insert upper hinge pin in upper VTC hinge...
FIGURE X WARRANTY Middle Atlantic Products (the "Company") warrants the VTC-R1214 Equipment Rack VTC Series to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product. The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty...