Olympus Camedia P-330E Instructions Manual page 6

WARNING
p Do not disassemble or modify the printer.
The printer has both hot and high voltage parts on the inside. To prevent an
electric shock or printer malfunction, do not attempt to disassemble or modify
the printer. For service or repair, contact your dealer.
p Do not place liquids on the printer.
Should any liquid sleep into the printer, it may result in fire or electric shock.
p Do not place heavy objects on the printer.
Doing so may deform the printer cabinet, resulting in fire or electric shock. If the
printer falls out of place or is dropped, it may be damaged.
p Do not install the printer in the following places.
To prevent fire, electric shock, and printer malfunction do not install the printer in
the following places.
• Dusty, humid, or oily places
Should any dust or liquid get into the printer, it may result in fire or electric
shock.
• Extremely hot places
Do not expose the printer to direct sunlight or extremely high temperature such
as near a heater. Doing so may deform the printer cabinet, resulting in fire or
electric shock.
Use the printer at the ambient temperature of 5 to 35 °C (41 to 95° F) and
humidity of 20 to 80 %.
p Do not use the printer with a power supply other than that specified.
Incorrect voltage may damage printer parts, possibly resulting in fire or electric
shock.
p Connect the power cord correctly.
For example, if the power cord is plugged in loosely, it may cause a fire or electric
shock. Push the plug all the way into the outlet.
6 GB