Olympus Camedia P-330E Instructions Manual page 23

Notes
• When handling the
print paper, do not
touch the printing
surface (shiny side
where nothing is
printed).
• Do not place the print
paper in a dusty
location. Fingerprints
or dust on the printing
surface may result in
imperfect printing.
• Use the print paper
recommended for this
printer only. If you use
a different type of
paper, it may cause
problems and the
printer may not print
properly.
• The automatic feeder
can hold up to 30 sheets
of standard paper,
sticker paper, or
passport photo paper.
To prevent paper jams,
when you add paper to
a partially full feeder,
make sure that the total
number of sheets does
not exceed this limit.
• To prevent paper jams,
do not place different
types of paper in the
automatic feeder.
• Do not fold or bend the
print paper.
• Do not use the sticker
papers which have
been peeled off.
• Do not write or type
anything on the reverse
side of the print paper
before printing. This
may cause paper
jamming or failure in
printing.
• You cannot type on the
printing surface; use an
oil ink pen to write
greetings or other
characters or to draw
on the printing surface.
4
Insert print paper with its printing surface facing
up.
You can load up to 30 sheets of standard paper into
the automatic feeder.
Do not push the paper too hard into the automatic
feeder. Make sure that the metal tabs in the
automatic feeder are not covered by the paper.
Printing surface
Make sure that the metal
tabs are not covered by
the paper.
5
Close the automatic feeder cover.
For stickers, place the side
with "OLYMPUS" face
down, and for standard
and passport photo
papers, place the stamp
mark side face down.
front
Paper
Correct
Metal tabs
Incorrect
Paper
23 GB
Setting Up