Connecting To The Computer - Olympus Camedia P-330E Instructions Manual

Notes on connection
• Connect either the
serial cable or the
parallel cable.
• If a camera is
connected, you cannot
print from the
computer. Disconnect
the camera.
• Use a shielded printer
cable which is shorter
than 2 m.
For IBM PC/AT:
If your computer does
not match the plug
Use a commercially
available cable having an
Anfenole full 36-pin plug
to connect to the printer
and a matching plug to
connect the computer.
Note
You may not be able to
use the printer and the
printer driver on a
network or a
commercially available
printer buffer.

Connecting to the computer

For how to install the printer driver and print from
the computer, refer to the supplied installation
guide.
By connecting the printer to your computer and
installing the supplied printer driver into your
computer, you can print the images from the computer
using a photo retouch application software.
Connecting to an IBM PC/AT and its
compatibles
Use the supplied cable (D-sub 25-pin plug, male/
Anfenole full 36-pin plug, male) to connect the IBM
PC/AT and its compatibles to the parallel port of the
printer.
To the printer port
(D-sub 25-pin plug)
IBM PC/AT and
its compatibles
Printer cable
(supplied)
Anfenole full 36-
pin plug
To parallel port
17 GB
Setting Up