What To Do If - Zanussi ZWI 1125 User Manual

What to do if ...

IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of button
machine is not working.
Once the problem has been eliminated, press the button
checks, the problem persists, contact your local Service Centre.
Malfunction
The washing machine does not start:
The machine does not fill:
18
5
to restart the programme. If after all
Possible Cause / Solution
The door has not been closed. (Red pilot light
blinks)
Close firmly the door.
●
The plug is not properly inserted in the power socket.
Insert the plug into the power socket.
●
There is no power at the socket.
Please check your domestic electrical installation.
●
The main fuse or the plug fuse has blown.
Replace the fuse.
●
The selector dial is not correctly positioned and the
5
button has not been pressed.
Please turn the selector dial and press the button
●
again.
7
The button has been selected.
If the laundry are to be washed immediately, cancel
●
the delay start.
The water tap is closed. (Red pilot light blinks)
Open the water tap.
●
The inlet hose is squashed or kinked. (Red pilot light
blinks)
Check the inlet hose connection.
●
The filter in the inlet hose is blocked. (Red pilot light
blinks)
Clean the water inlet hose filter.
●
The door is not properly closed. (Red pilot light
blinks)
Close firmly the door.
●
5
blinks to indicate that the
5