Setting Up The Massage Lounger - Panasonic EP-MA73 Manual

Setting up the massage lounger

1
Where to use the unit
●
Ensure there is adequate space to recline.
Keep at least 10 cm away from the wall.
Width approx. 90 cm
Approx.
49 cm
Mat Area where legrest
could touch the floor
●
Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of
heating sources, because this can cause discoloration or hardening of the synthetic leather.
●
Place the unit on a mat to prevent floor damage. When placing a mat under the unit, the size
of the mat should be sufficient (at least 120 cm × 70 cm) to cover the areas where the unit
touches and where the legrest could touch the floor, as shown in the diagram on the above.
●
Install the unit near a power outlet.
2
Confirm that the main unit and the accessories are in the box.
Main unit
Controller
12
EP-MA73.indb 12
Approx. 202 cm
Approx.
30 cm
Area where unit
touches the floor
Accessories
●Armrests (Right/Left)
Right/Left indication
(Back of the armrest)
The holes in the fabric
at the back of the
hand & arm massage
section are due to
the manufacturing
process and are not a
fault.
CAUTION
Do not use in damp or humid places such as a
bathroom.
Doing so may cause electric shock.
Always use on a flat surface.
Failure to do so may result in the unit tipping over,
causing an accident.
The unit should not be used on top of heating
appliances, such as electric carpets, etc.
Doing so may cause fire.
●
For details on the dimensions of the unit, see
page 59.
●Pillow ●    A llen key — 1
(Cross-section)
●
C omfort
cushion
4 mm
●Controller stand
Controller
holder
Controller
●
holder fixing
P ower cord
screw
Clip
●
A ttachment screws
(M6 × 13) — Black

(4 pcs.)
(M6 × 29) — Silver
(2 pcs.)
●Lock switch key
This is initially inserted
in the lock switch of the
power switch section
prior to leaving the
factory.
2015-1-19 10:26:03