(Continued)
Assembly
5
Turn on the power and raise the backrest to the upright position.
❶
●
Insert the power plug into the
Insert the power plug into the
power outlet.
power outlet.
●
● Always be sure to insert into an AC
Always be sure to insert into an AC
220 V plug.
●
❷
Confirm the lock switch key
Confirm the lock switch key
is set to the open position.
is set to the open position.
●
❸
Confirm the power switch is
Confirm the power switch is
set to the on position.
set to the on position.
❹
●
Press
Press
●
● Press once, and then press again approx. 1 second later.
Press once, and then press again approx. 1 second later.
Backrest will rise automatically.
Backrest will rise automatically.
6
Placing the controller
❶
●
Placing the controller
Placing the controller
into the controller
into the controller
stand.
stand.
●
❷
Fasten the controller
Fasten the controller
cord using the clip.
cord using the clip.
●
● Fasten so the cable under
Fasten so the cable under
the clip will not sag too
much with the backrest
raised.
(Because there is a
chance of the cord
becoming tangled with
your feet, etc.)
16
EP-MA73.indb 16
on the controller twice.
❶
●
❷
●
❶
●
W
❸
●
❷
●
2015-1-19 10:26:08