Speaker Assembly - Lenovo ThinkPad P1 Gen 2 User Manual

Speaker assembly

Prerequisite
Before you start, read Appendix A "Important safety information" on page 61 and print the following
instructions.
Replacement procedure
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 45.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 46.
5. Detach the connector of the speaker assembly
6. Remove the speaker assembly.
1 and then release the speaker cables 2 .
.
Chapter 6 CRU replacement
51