Lenovo ThinkPad P1 Gen 2 User Manual page 56

5. Remove the M.2 solid-state drive:
a. Remove the screw that secures the M.2 solid-state drive
from the secured position and pivots upward.
b. Carefully remove the drive out of the slot
6. Install a new M.2 solid-state drive:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert
the drive into the slot at an angle of about 20 degrees
downward 2 .
b. Install the screw to secure the M.2 solid-state drive
7. Reinstall the base cover assembly.
8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
50
P1 Gen 2 and X1 Extreme User Guide
1 . The M.2 solid-state drive is released
2 .
1 and pivot the M.2 solid-state drive
3 .