Lenovo ThinkPad P1 Gen 2 User Manual page 31

– Solid amber: charging
– Solid green: fully charged
• Battery power status
– Blinking amber: battery power is less than 20% (charging recommended)
– Off: no battery power (charging recommended) or battery power is more than 20%
• Bluetooth pairing status
– Green, blinking once every second: pairing
– Green, blinking five times quickly in two seconds: paired
– Green, blinking once: the top pen button is pressed or double pressed
3
USB-C connector: To charge the pen, connect the pen to a USB-C connector of the computer with a
USB-C cable.
4 Top barrel button: To right-click, hold the top barrel button and tap the screen in supported applications.
5 Bottom barrel button: To erase texts or drawings, hold the bottom barrel button to erase the object in
supported applications.
Notes:
• The default function of each barrel button might vary in different apps.
• To customize the barrel button functions, use the Wacom Pen application. If the Wacom Pen application
is not installed on your computer, download and install the latest WinTab driver from
.
support.lenovo.com
6 Pen tip: To click, tap on the screen with the tip. To double-click, tap twice.
Pair the pen
1. Enable Bluetooth pairing on the pen by pressing and holding the top of the pen for at least three
seconds until the LED indicator flashes in green.
2. Enable Bluetooth pairing on your computer to discover and pair the pen. See "Connect to a Bluetooth-
enabled device" on page 28. The pen is discoverable as Lenovo Pen Pro.
After pairing, press or double-press the top pen button to access more functions. To customize the top pen
button functions, use the Wacom Pen application or open the Start menu
Pen & Windows Ink ➙ Pen shortcuts.
https://
and tap Settings ➙ Devices ➙
.
Chapter 2 Get started with your computer
25