Battery Power; Checking The Battery Level - Medion Akoya LS Manual

Battery Power

A fully charged Li-Ion battery will provide power for hours of operation.
However, the battery life will vary according to how the power saving
functions are set, the way you work, how much memory your computer has
and the display type.
When working in Windows an audible warning alert will sound as soon as the
battery level drops below a set minimum value. When this happens, the
processing power is reduced in order to save power.
NOTE: Battery warning signals and "Low-Battery" mode will be
heard immediately when the power pack is first connected.

Checking the Battery Level

In order to check the current level of the battery, move the cursor over the
power symbol in the taskbar.
When in battery mode, a battery symbol is displayed and when the power
adapter is in use a power connector is displayed. If the battery is being
charged, the power connector has a lightning symbol superimposed over it.
Further information on power settings can be obtained by double clicking on
the symbol.
NOTE: If you ignore the warning signal when the battery level is
low, your Notebook goes into suspend mode. (Depending on the
BIOS/OS setting this will be Save-to-Disk or Save-to-RAM).
WARNING! If the battery is empty, your data will not be retained
for long in Standby/Save-to-RAM mode.
WARNING! Never remove the battery while the Notebook is
switched on or if the Notebook has not yet gone into suspend
mode, as this may lead to loss of data.
P S
O W E R U P P L Y
1 7