Raypak 185A Replacement Instructions Manual page 2

ACCESSING THE BOARD
1. Turn off the power to the heater.
2. Turn off the gas to the heater.
3. Remove front door.
4. Remove the four screws on the side of the heater
holding the control panel. See Fig. 1 and Fig. 2.
5. Lay control panel forward toward you to acces the
back of the control board.
REMOVE THESE SCREWS
Page 2
Fig. 1
241169
P/N
Effective: 10-01-10
Replaces: 09-05-08
Fig. 2
Rev 4