Twisted Leads; Removal Procedure; Installation Procedure - Isuzu 4HL1 Workshop Manual

1A-258 Engine Control System

Removal Procedure

1. Locate the damaged wire.
2. Remove the insulation as required.

Installation Procedure

1. Use splice clips and rosin core solder in order to
splice the two wires together.

Twisted Leads

2. Cover the splice with tape in order to insulate it
LNW21ASH004701
3. Twist the wires as they were before starting this
LNW21ASH004601
from the other wires.
procedure.
LNW21ASH004801
LNW21ASH004901