Assembling The Pocket Bag Clamp - DURKOPP ADLER 755 A Service Instructions Manual

Additional equipment

27.4 Assembling the pocket bag clamp

Fig. 231: Assembling the pocket bag clamp
(1) - Pocket bag clamp
To assemble the pocket bag clamp:
1. Tighten the pocket bag clamp (1) on the fabric sliding plate using
2. Set the height of the magnet using the screw thread.
Service Instructions 755 A/756 A - 00.0 - 02/2019
①
screws (2).
The pocket bag clamp (1) is held in place by a magnet on the left-hand
side of the fabric sliding plate.
(2) - Screws
②
235