Setting The Guide Plates At The Folder - DURKOPP ADLER 755 A Service Instructions Manual

Folder

17.4 Setting the guide plates at the folder

Fig. 111: Setting the guide plates at the folder (1)
(1) - Guide plates
(2) - Screw
(3) - Screw
Proper setting
The leaf springs (6) hold the guide plates (1) down by exerting a low
pressure. The pressure must be set in such a way that the elastic guide
plates (1) can be easily lifted by the fed piping strips or by the flap.
To adjust the guide plates at the folder:
1. Lower the folder or remove the folding station.
2. Check the position of the guide plates (1) in relation to the needles
3. Loosen the screw (2).
4. Set the guide plates (1) sideways.
Service Instructions 755 A/756 A - 00.0 - 02/2019
①
and the folder sole.
② ③ ④
(4) - Screw
(5) - Screw
(6) - Leaf springs
⑥
⑤
107