DURKOPP ADLER M-TYPE PREMIUM COMMANDER User Training Manual page 64

Exercise: Create a complex Program
Create a program consisting of several seam sections
• Create the program
P 8 COMPLEX PROGRAM
• Segment 1:
• stitch length 3.8 mm
• sewing foot stroke 1.5 mm
• needle thread tension 25
• stitch count: number of stitches 12
• Seg.End Mode: Stop active On, Thread
Trim inactive Off, Needle Up inactive Off,
Foot lifted inactive Off
• start backtack: active On
• end backtack: inactive Off
• Foot lifted: Off
(foot lift at sewing stop on the seam)
• Segment 2:
• stitch length 6 mm
• sewing foot stroke 5 mm
• stitch count: mode 0 (not counted)
• Seg.End Mode: Stop active On,
Thread Trim active On,
Needle Up active On, Foot lifted On
• start backtack: inactive Off
• end backtack: active On
• Global parameters of program:
• program name: COMPLEX PROGRAM
• FabricThickness: active On
• Stroke: Mode 2.Value On/Off,
Min. Material thickness 3 mm
• stitch lengths: Mode linear,
Min. Material thickness: 2 mm,
Max. Material thickness: 5 mm
63