Removing And Washing The Bottle Holder - BH FITNESS T7 Owner's Manual

REMOVING & WASHING THE BOTTLE HOLDER
To check if the Bottle Holder is held loosely, gently push the Bottle Holder up from beneath. If
this does not release the Bottle Holder, then remove as follows:
RIGHT BOTTLE HOLDER REMOVAL OR INSTALLATION:
Gently grasp the Bottle Holder from beneath or on the rim. Turn it clockwise to unfasten.
Once the Holder is loosened, lift the Holder up and out of the hole.
To install a Bottle Holder into the right hole:
Move away the wires.
Insert the Holder into the hole and gently turn counterclockwise to fasten.
LEFT BOTTLE HOLDER REMOVAL OR INSTALLATION:
Gently grasp the Bottle Holder from beneath or on the rim. Turn it counter-clockwise to
unfasten.
Once the Holder is loosened, lift the Holder up and out of the hole.
To install a Bottle Holder into the left hole:
Move away the wires.
Insert the Holder into the hole and gently turn clockwise to fasten.
Bottle Holder
Left Bottle Holder hole
BOTTLE HOLDER WASHING
Please wash the Bottle Holders by hand only. The Bottle Holders cannot be placed into the
dishwasher or microwave.
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
All manuals and user guides at all-guides.com
MAINTENANCE CONTINUED
14
Bottle Holder
Right Bottle Holder hole
T7 Treadmill