THUNDER TIGER Titan Raptor 50 Size 3D Heli Assembly & Maintenance Manual page 22

22 Main Rotor Assembly
The 600mm wood blades come with the kit, however, we suggest to use wood blade for Hovering only. Make
sure you do the blade modification as page 32 instructed before you fly.
For F3C or 3D flying, we strongly recommend using Carbon or Fiberglass rotor blades for safety and higher
performance.
Important-While Thunder Tiger takes great care to manufacture the most balanced blades available, no two rotor
blades are exactly the same. It is highly recommended that you purchase a blade balancer from your hobby dealer.
Follow the manufacturer's instructions for balancing the blades and install on helicopter.
(1) BV0455 Main Rotor Blade(600mm).......2
(2) HMD2612B Self Tapping Screw (M2.6x12)...4
(3) BK0073 Upper Blade Grip... .................. 2
(4) BK0074 Lower Blade Grip..................... 2
(5) HMM4Z Lock Nut(M4)............................ 2
(6) HMC4-27B Socket Screw (M4x27).........2
(6)
(5)
21
(1)
(4)
Make sure you do the blabe modification as
page 32 instruction before you fiy.
(2) (3)