Safe Operation - Singer 141G Series Instruction Manual And Parts List

1.2

Safe Operation

Integrated Energy Saving Direct Drive Motor Lockstitch Sewing Machine
·
To avoid the risk of electric shock,
do not open the motor wiring box
and do not touch the components
assembled inside the wiring box.
·
To avoid injuries do not run the
machine without the belt cover or
in case any other safety device is
removed.
·
To avoid
gers, head and clothes far from
wheel , belt and motor when the ma-
chine is running . Nothin g should be
placed near those parts.
·
To avoid injuries never put your
fingers next to the rotating hook
and the thread take-up lever cover
when the machine is running.
· To avoid possible injuries be care-
ful when putting down or lifting
the machine head.
·
To avoid accident in case of a sud-
den start of the machine always
turn it off when laying it down, or
remove the belt cover and the belt.
CAUTION
·
Carry the sewing machine with two
persons as the shown in the figure.
Do not hold the handwheel.
·
If you machine is equipped with
a servomotor, it does not make
noises while being driven.To avoid
a possible accident caused by an
unexpected start, be sure the ma-
chineis turned o ff.
·
To avoid electrical shock, do not
run the machine without proper
grounding.
·
To minimize the risk of accidents
or damage in electric components
caused by electric discharge turn
the machine off before unplug-
ging it.
·
Clean the machine periodically.
·
Do not put a obstacle thing such as
screwdriver at the location , where
the sewing machine will be placed.
|
Instruction Manual and Parts List
2