Safe Operation - Singer 321C Instruction Manual And Parts List

1.2

Safe Operation

Downloaded from ManualsNet.com
• To avoid the risk of electric shock,
do not open the motor wiring box
and do not touch the components
assembled inside the wiring box.
• To avoid injuries do not run the
machine without the belt cover or
in case any other safety device is
removed.
• To avoid possible injuries keep
fingers, head, and clothes far
from wheel, belt and motor when
the machine is running. Nothing
should be placed near those parts.
• To avoid injuries never put your
fingers next to the loopers when
the machine is running.
• The shuttle whirls at high speed
while the machine is running. To
avoid hand injuries, keep them
away from the shuttle while the
machine is running. Turn off the
machine to replace the bobbin.
• To avoid possible injuries be care-
ful when putting down or lifting
the machine head.
search engine
• To avoid accidents in case of a
sudden start of the machine al-
ways turn it off when laying it
down, or remove the belt cover
and the belt.
• If your machine is equipped with
a servomotor, it does not make
noises while being driven.To avoid
a possible accident caused by an
unexpected start, bev sure the ma-
chine is turned off.
• To avoid electric, do not run the
machine without proper ground-
ing.
• To minimize the risk of accidents
or damages in electric compo-
nents caused by electric discharge
turn the machine off before un-
plugging it.
• Clean the machine periodically.
High Speed Overlock Machine | Instructions Manual and Parts List
2