Safe Operation - Singer 321C 131M-04 Instruction Manual

1.2
Safe Operation
A0 To avoid the risk of electric shock,
do not open the motor wiring box
and do not touch the components
assembled inside the wiring box.
0To avoid injuries do not run the
machine without the belt cover or
in case any other safety device is
removed.
0To avoid possible injuries keep
fingers, head, and clothes far
from wheel, belt and motor when
the machine is running. Nothing
should be placed near those parts.
0To avoid injuries never put your
0To avoid accidents in case of a
sudden start of the machine al-
ways turn it off when laying it
down, or remove the belt cover
and the belt.
Olf your machine is equipped with
a servomotor, it does not make
noises while being driven. To avoid
a possible accident caused by an
unexpected start, bev sure the ma-
chine is turned off.
0To avoid electric, do not run the
machine without proper ground-
Ing.
fingers next to the loopers when A'TO minimize the risk of accidents
the machine is running.
0The shuttle whirls at high speed
while the machine is running. To
avoid hand injuries, keep them
away from the shuttle while the
machine is running. Turn off the
machine to replace the bobbin.
0 To avoid possible injuries be care-
ful when putting down or lifting
the machine head.
or damages in electric compo-
nents caused by electric discharge
turn the machine off before un-
plugging it.
OCIean the machine periodically.
High Speed Overlook Machine | Instructions Manual and Parts List 2