Oil Reservoir Installation - Singer 141G Series Instruction Manual And Parts List

3.2
Oil Reservoir
Installation
Integrated Energy Saving Direct Drive Motor Lockstitch Sewing Machine
The oil reservoir should rest on the
four corners of the machine table
groove.
Two rubber seats ' 1' for supporting
the head portion on the operator
side 'A' are fixed on the extended
F g i
Two hinges ' 1' fit into the hole in
the machine bed, and the machine
head fitted the table hinge's rubber
Figure 4
portion of the table and other two
rubber cushion '2' on the hinge side
Then, the oil reservoir '3' is placed.
u e r 2
' 2' , before the machine head is
placed to the cushions ' 3' on the
four corners of the table.
'B'.
F g i
1
Figure 5
| Instruction Manual and Parts List
u e r 3
2
6