3. When there is no microwave oscillation
1) When pressing START button, oven lamp does not turn on.
Fan motor does not rotate, but cook indicator in display comes on.
- Check method
STATE
RELAY 2 ON
RELAY 2 OFF
2) When pressing START button, oven lamp turns on.
Fan motor and turntable rotate and cook indicator in display comes on.
- Check method
STATE
RELAY 1 ON
RELAY 1 OFF
4. When the door is opened during operation, the count down timer does not stop.
- Check method
STATE
DOOR OPEN
DOOR CLOSED
CHECK NO
1
Check the stage(ON,OFF) of the door open
monitor switch by resistance measurement.
5. When the digital clock does not operate properly.
→ refer to Circuit Diagram
POINT
5V
IC 1 PIN 8
0V
*If clock does not keep exact time, you must check resistor R20, R19, D11, C6 and zener diode ZD2.
POINT
POINT
POINT
METHOD
WAVE FORM
T:20ms(50Hz)
T
28
A
5V DC
GND
A
5V DC
GND
A
OPEN
CLOSE
Replace door open monitor swith.
B
GND
15V DC
B
GND
15V DC
B
+5V DC
GND
REMEDY