Valve Positions; Cleaning The Badu Mat - BADU Mat R 41 Translation Of Original Operation Manual

3

Valve positions

Valve position
FILTER
BACKWASH
RINSE
CLOSED
WASTE
CIRCULATE
4

Cleaning the BADU Mat

1. Switch the pump off.
2. If required, close the ball valves in the pipes and drain the
system slightly.
3. Release the 6 or 10 screws on the lid, remove the complete
upper part and clean the BADU Mat.
4. When reassembling, pay attention to the position markings
(the same mounting brackets from the lid and housing must
sit above each other).
01|2019
Function/flow direction in valve
Swimming pool water is filtered.
PUMP – TO FILTER (top) – THROUGH
THE FILTER (from top to bottom) – FROM
FILTER (bottom) – TANK – SWIMMING
POOL
Cleaning the filter system in reverse flow.
PUMP – FROM FILTER (bottom) –
THROUGH THE FILTER (from bottom to
top) – TO FILTER (top) – LINE – DRAIN
Clean the filter medium and pipes after
backwashing.
PUMP – TO FILTER (top) – THROUGH
THE FILTER (from top to bottom) – FROM
FILTER (bottom) – LINE – DRAIN
No circulation.
Never operate the pump in this position!
Pool drainage.
PUMP – LINE - DRAIN
Circulate without filter.
PUMP – TANK - SWIMMING POOL
Valve positions
EN 5