Advertisement
3. QFlex 32LS Assembly
Align the three columns together as shown below.
Having the hinge points on either side of the QFlex column allow the loudspeaker to be rotated at 90 degrees
to the mounting structure allowing easy access to the input connector panel.
The installer must ensure that the mounting surface is capable of safely and securely supporting the
loudspeaker. Seek help from architects, structural engineers or other specialists if in any doubt.
6
QFLEX 32LS Mounting and Installation Guide rev 2.2.0
STAGE 3
Attach the joining plates in the three stages
as shown. Only one wall bracket it required
to mount the two modules. For flexibility the
wall bracket can be mounted to either the
top or the bottom column. The wall bracket
can be hinged on the left or right pivot points.
3 mm Allen grub screws allow the QFlex to
be locked at the desired horizontal angle.
STAGE 2
STAGE 1
Advertisement
