Repair
Compressor Removal
For references (1) - (99), see Parts, manual 313406. For
reference numbers(101) - (199) see Parts, page 7.
To avoid injury, including electric shock turn off
sprayer and unplug power cord before performing any
repair procedures.
1. Remove four thumbscrews (105) hose wrap (35),
remove filter retainer (17), prefilter (20), main filter
(16) and filter gaskets (19).
2. Remove CompPack Compressor (A).
ti12857a
3. Remove air tube (107) from quick connector (109)
barb fitting.
4
A
21
20
17
105
4. Disconnect three spade connectors (B) from back of
inlet plug (102).
5. Remove three screws (104) from compressor box
(112) and remove compressor (111).
112
Compressor Installation
1. Install compressor (111) in compressor box (112)
with three screws (104).
2. Connect three spade connectors (B) to back of inlet
35
plug (102).
3. Install air tube (107) on quick connector (109) barb fit
ting.
4. Install CompPack Compressor (A).
5. Install main filter (21), pre-filter (20), filter retainer (17)
and hose wrap (35) with four screws (105).
111
107
109
B
102
104
313440E
Repair