Nice Moby Series Instructions And Warnings For The Fitter page 14

• Children: an automated system ensures a high level of safety as it
always offers reliable and safe operation and its detection systems
stop it from moving in the presence of people or objects. However,
children should not be allowed to play near it. Do not let them
accidentally use the system by leaving the remote control unit within
their reach: it is not a toy!
• Faults. If you notice any abnormal behaviour, disconnect the system
from the electricity supply immediately and perform the manual
release operation. Do not attempt to make repairs yourself but call in
your fitter: in the meantime the system can work as a non-automated
gate once the gear motor has been released as described further on.
• Maintenance. Just like all machines, your automated system
requires periodic maintenance to ensure it works as long as possible
and in total safety. Agree on a routine maintenance plan with your
fitter; Nice recommends a visit once every six months for normal
residential use but this period can vary depending on how often the
system is used.
All controls, maintenance work or repairs may only be carried out by
qualified personnel.
• Do not modify the system or its programming and adjustment
parameters even if you think you can do it: your fitter is responsible for
this.
• Final testing, routine maintenance and any repairs must be
1
1. Push back the protective membrane as shown in fig. 1
2. insert the key and turn it anti-clockwise as shown in fig. 2
3. Pull up the handle in the direction of the arrow until it reaches the point shown in fig. 3
4. Move the leaf to its maximum opening or closing point
5. Carry out the above operations backwards when locking the system
Important: if the radio control unit (if supplied) starts working badly
after a time, or does not work at all, the batteries may be flat (They can
last from several months to two/three years depending on the type). You
can notice this from the fact that the transmission OK LED is faint,
doesn't light up at all, or lights up for just a moment. Before contacting
your fitter, try exchanging the battery with that of another transmitter you
know that works: if this is the reason for the fault, just replace the battery
with another one of the same kind.
12
documented by the fitter and such documents kept by the owner of
the system.
• Disposal. At the end of the life of the automatic system, make sure
that it is demolished by qualified personnel and that the materials are
recycled or disposed of according to local regulations.
• In case of breakage or during a power failure. While waiting for your
fitter to call (or power to come on again if the system does not have
buffer batteries), the system can be used just like any other manual
opening system. To do this, perform the manual release operation:
this can be done by the user and Nice has made it as easy as
possible, without the need for tools or physical effort.
2
Are you satisfied? If you wish to add a new automated system to
your house, contact your fitter and we at Nice will provide the advice of
a specialist, the most developed products on the market, leading-edge
operativeness and maximum compatibility.
Thank you for reading these suggestions and we trust you are fully
satisfied with your new system: please contact your fitter for all your
current or future requirements.
3