Table of Contents
Advertisement
PRG Professional Ranges Care and Use
Part/Material/Soil Condition
Grates
Porcelain Enamel on Cast Iron
Griddle – Steel
Griddle Grease Pan –
Stainless Steel
Grill Grate
Porcelain Enamel on Cast Iron
Grill Box, Heat Shields,
Radiant
Stainless Steel
Grill Drip Pan
Aluminum
Range Cleaning Chart
Cleaning Products/Directions
Hot sudsy water. Mild Abrasive Cleansers: Bon-ami
®
Scrub
. For stubborn stains: a soap filled steel wool pad.
•
Wash, rinse and dry. The occasional use of mild abrasive cleaners
or steel wool soap filled pad is okay. Abrasive cleansers, used
vigorously or too often, can eventually harm the enamel.
Apply with a damp sponge, rinse thoroughly, and dry.
•
When removing the grates, care should be taken in lifting
them. Be sure to place the grate on a protected surface.
NOTE: Grates will develop blisters and chips in the porcelain with
use due to the extreme operating temperatures
See Pages 23 and 34 for detailed directions.
See Cooktop Back Panel Stainless Steel Directions on Page 37.
See Page 34 for detailed directions.
The quality of this material resists most stains and pitting, providing the
surface is kept clean and protected.
Nonabrasive Cleaners: Hot soapy water, ammonia or detergent and
water.
• Apply with sponge or cloth then wipe clean using a clean cloth and
thoroughly dry the surface. Regularly apply stainless steel cleaner-
polish such as Stainless Steel Magic
lustre.
• Do not allow food deposits to remain on stainless steel for any length
of time.
Mild Cleaners: General kitchen cleaners such as Fantastik®, Formula
409®. Vinegar: to remove hard water spots
• Apply with sponge or cloth, then wipe clean using a clean cloth and
thoroughly dry the surface.
Mild Abrasive Cleaners: RevereWare Instant Stainless Steel Cleaner
Kleen King Stainless Steel Cleaner or Liquid.
• Apply with a damp sponge or cloth. Rub lightly in direction of the
polish lines. Wipe clean using damp cloth or sponge and dry surface.
Remember, chlorine or chlorine compounds (check the labels) are
corrosive to stainless steel. It is very important to rinse thoroughly and
dry if a cleaning agent with chlorine is used.
Heat tint or discoloration: RevereWare Instant Stainless Steel
®
Cleaner
.
• Apply with a damp cloth or sponge. Satisfactory for use on all finishes
if rubbing is light. Use in direction of grain lines.
Hot sudsy water, rinse and dry thoroughly. For stubborn stains use
a soap filled steel wool pad.
Page 32
Section Six: Care and Maintenance
®
to protect the finish and leave a soft
®
, Soft
®
.
Hide quick links:
Advertisement
Table of Contents
