System Settings; System Notifications - Thecus IP Storage Server N7700 User Manual

AD Domain Example
Item
Work Group / Domain
Name
ADS Support
ADS Server Name
ADS/NT Realm
Administrator ID
Administrator
Password
Confirm Password
NOTE

System Settings

The System menu gives you a wealth of settings that you can use to configure
your N7700's system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.

System Notifications

From the System menu, choose the
Notification item, and the Notification
Configuration screen appears. This screen
lets you have the N7700 notify you in case
of any system malfunction. Press Apply to
confirm all settings. See following table for
a detailed description of each item.
NOTE
Notification Configuration
Item
Beep Notification
Email Notification
SMTP Server
Port
Auth Type
SMTP Account ID
Account Password
Confirm Account
Password
Receiver's E-mail
Address
Test E-Mail
Information
domain
Enable
Computer1
Domain.local
Administrator
***********
***********
• The DNS server specified in the WAN configuration page should be
able to correctly resolve the ADS server name.
• The time zone setting between N7700 and ADS should be identical.
• The system time difference between N7700 and ADS should be less
than five minutes.
• The Administrator Password field is for the password of ADS (Active
Directory Server) not N7700.
Consult with your mail server
administrator for email server
information.
Description
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Select the SMTP Server account authentication type.
Set the SMTP Server Email account ID.
Enter a new password.
Confirm a new password.
Add one or more recipient's email addresses to receive email
notifications.
Click to send out a test e-mail to make sure the settings are
correct.
54