Wan Lan Exchange; Web Services Configuration - Thecus IP Storage Server N7700 User Manual

WEP Enable
Key Length
WEP KEY 1
WEP KEY 2
WEP KEY 3
WEP KEY 4
A DHCP server can be configured to assign IP addresses to devices connected to
L AN ports.
WLAN DHCP Configuration
Item
DHCP Server
Start IP
End IP
DNS Server
NOTE
NOTE

WAN LAN Exchange

The N7700 is equipped with both WAN and
LAN ports. The WAN LAN Exchange function
allows you to exchange the functionality of
th ese ports directly through the Web User
Interface.
From the Network menu, choose the
LAN Exchange item, and the WAN LAN
Exchange Support screen appears.
Choose Enable o r Disable, and click Apply
to save your changes. Click Cancel to exit
w ithout saving.

Web Services Configuration

From the Network menu, choose the
Service item, and the Web Service screen
appears. This screen displays the service
support parameters of the system. You ca
change any of these items and
to confirm your settings. A description of
e ach item follows:
Specifies whether to use encryption for trans
Key length specifies the level of encryption use
64 bit: 10 characters from 0 ~ 9 and A ~ F.
128 bit: 26 characters from 0 ~ 9 and A ~ F.
Input up to 4 WEP keys, and select the one y
When connecting, be sure to enter the same key and select the
same index number on each client machine.
Description
Select to enable or disable DHCP server.
Specifies the starting IP address of the DHCP range.
Specifies the ending IP address of the DHCP range.
Specifies the DNS server IP address.
The IP Segment of WLAN, WAN and LAN should not overlap.
Users should obey the international RF regulatory rules as they set up
the wireless RF channel on the N7700. The RF operating channels for
different regions have been specified as following. Thecus has no
responsibility for users attempting to violate the international RF
regulation.
11 N. America
14 Japan
13 Europe (ETSI)
2 Spain
4 France
WAN
n
press Apply
48
mission or not.
d by the N7700.
ou wish to use.