Midland BT2 Manual page 21

Midland BT2 Intercom
Thank you for purchasing the Midland BT2 Intercom, the first truly wireless multimedia system for bikers.
The Midland BT2 is designed to be fitted directly on to your helmet and to be used for communications with Bluetooth devices like
mobile phones, GPS Sat-Navs and MP3 players. If desired, it can also be paired with another Midland BT2 unit and used as wireless
Rider/Pillion Intercom system or Rider to Rider in bike-to-bike mode, within a maximum range of 200 meters. The Midland BT2 is
also supplied with a wired connection that can be used to connect an iPod/MP3 player or PMR446 transceiver,which will then enable
bike-to-bike communications up to a maximum range of 5 km.
Midland BT2 is available in two versions:
› Single BT2 Intercom kit with one unit only
› BT2 Intercom TWIN with two units
Depending on the model purchased, the package contains
the following parts:
BT2 Intercom
› 1 BT2 communication unit
› 1 audio kit with two stereo speakers, microphone with
boom and wire microphone
› 1 plate with bi-adhesive strip to fix the unit onto the helmet
› 1 clamp to fix the unit onto the helmet
› 1 stereo audio cable to connect an iPod/ or other models
of MP3 players
› 1 miniUSB wall-mounting power supply
› Wind Suppressing Foam Microphone Cover, Allen key and
Velcro strip for assembly
BT2 Intercom TWIN
› 2 BT2 communication units
› 2 audio kits with two stereo speakers, microphone with
boom and wire microphone
› 2 plates with bi-adhesive strip to fix the unit onto the hel-
met
› 2 clamps to fix the unit onto the helmet
› 2 stereo audio cables to connect an iPod/ or other models
of MP3 players
› 1 miniUSB wall-mounting power supply with double plug
› Wind Suppressing Foam Microphone Cover, Allen key and
Velcro strip for assembly
The units included in the TWIN kit are already paired and
can therefore be immediately used in the Intercom mode.
Technical specifications of Midland BT2
General:
› Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP pro-
tocol)
› AGC system automatically controls the volume in relation
to background noise
› Voice (VOX) or manual communications option
› Private or shared (3-way communications) call mode
› Manual controls to enable: telephone, intercom and wire
connection
› Fully waterproof
› Lithium battery with 8 hours talk time (1 week in standby
mode)
› Recharge time: app. 4 hours
› Dimensions. Length: 87 mm – Width: 47 mm - Thickness:
16 mm
Bluetooth connections:
› Identical device for Rider to Pillion or Bike-to-Bike Intercom
mode, up to a maximum range of 200 meters
› Bluetooth devices
- Mobile phone, GPS (Garmin Zumo and TomTom Rider 1
and 2), MP3 player Stereo (with A2DP protocol)
- PMR446 transceivers (with built-in or external Bluetooth
connection) for group bike-to-bike communications
Wire connections:
› For stereo audio input (iPod/MP3 player)
› For PMR446 transceivers (with optional cable)
Attention: before using BT2 for the first time, remember
to recharge it for at least 4 hours.
Attention: Midland BT2 is designed to withstand rain and
water. However, if it is raining, always verify that the rub-
ber caps protecting the sockets are fully fitted.
3