Using Caller Id - Motorola E1000 Manual

With automatic redial, your handset automatically redials the
number. When the call goes through, your handset rings or vibrates
one time, displays the message
the call.
To turn automatic redial on or off
Find the Feature
When automatic redial is turned off, you can manually activate the
feature to redial a phone number. When you hear a busy signal and
see
Number Busy
Press
N or
key
RETRY
Your handset automatically redials the number. When the call goes
through, your handset rings or vibrates one time, displays
Redial Successful

Using Caller ID

Incoming Calls
Calling line identification (Caller ID) displays the phone
number for incoming calls.
The handset displays the caller's name (and picture, if
available) if the name is stored in your contacts, or
when caller ID information is not available.
Incoming Call
You can also set your handset to play a distinctive
specific entries stored in your contacts. For more information, see
page 104.
70 - Calling Features
:
, and then connects the call.
Redial Successful
M
>
Settings
>
Auto Redial
To
activate automatic redial
, and then connects
>
Initial Setup
for
Ringer ID