Download Print this page

Power Supply Specifications - GE Tetra GEPS24-100U-GL Installation Manual

Led systems power supply

Advertisement

NOTE: For CSA approval, a disconnect/toggle switch of appropriate rating needs to be placed within 29.5 ft. (9 m) of primary side of the
power supply. The minimum rating of the switch must be either 120 or 220 Volts AC. The switch must also support twice the amount of
input current.
NOTE: When installing power supply, connect to the appropriate sized building breaker or disconnect device for line and neutral
connections, in accordance with local, state or country regulations.
NOTE: The grounding and bonding of the power supply and overall sign shall be done in accordance with National Electric Code (NEC)
Article 600.

Power Supply Specifications

Performance Data
Input Voltage (VAC)
Input Frequency (Hz)
Input Current (A)
Output Voltage (VDC)
Output Current (ADC)
Output Power (W)
Environmental Operating Temperature Range
Environmental Humidity (non-condensing)
Environmental Storage Temperature Range
Dimensions
GEPS24-100U-GL
Supports
Tetra Products SKUs
Tetra
GEWHDSPS6, GEWWDSPS6-50K,
PowerStrip DS
GEWWDSPS6-41K, GEWWDSPS6
Tetra
GEWHBDP6, GEWWBDP6-50K,
miniStrip DS
GEWWBDP6-41K, GEWWBDP6
Tetra
GEWHBIP2, GEWWBIP2-50K,
EdgeStrip
GEWWBIP2-41K, GEWWBIP2
Tetra
GEWHXNLA2-WH, GEBLXNLA2-BL,
Contour LS
GEGLXNLA2-GL, GERDXNLA2-RD,
GEWHXNAA2-WH, GEBLXNAA2-BL,
GEGLXNAA2-GL, GERDXNAA2-RD
Tetra Contour
GEWHXNLE1, GEWWXNLE1, GEBLXNLE1,
GEGLXNLE1, GERDXNLE1, GERCXNLE1,
GEYAXNLE1
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Tetra is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
Min
108
-
0.35
23
-
-
-40°C
0%
-40°C
9.5 in. x 1.7 in. x 1.2 in. (241 mm x 43.2 mm x 30.5 mm)
Rated
Maximum Load
Watts
per Power Supply
16 modules/
6W/mod
22.0 ft. (6.71m)
39 modules/
2.2W/mod
39 ft. (11.89m)
37 modules/
2.4W/mod
37 ft. (11.28m)
3.2W/ft.
29 ft. (8.84m)
3.2W/ft.
29 ft. (8.84m)
Conforms to the following standards:
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Typical
120-277
50/60
-
24
-
-
+25°C
-
-
*Maximum case temperature is 85°C
Remote Mounting Distance
18 AWG/
16 AWG/
14 AWG/
0.82 mm
1.31 mm
2.08 mm
2
2
20 ft./6.1m
25 ft./7.6m
35 ft./10.6m
20 ft./6.1m
25 ft./7.6m
35 ft./10.6m
20 ft./6.1m
25 ft./7.6m
35 ft./10.6m
30 ft./9.1m
50 ft./15.2m
80 ft./24.4m 120 ft./36.6m
30 ft./9.1m
50 ft./15.2m
80 ft./24.4m 120 ft./36.6m
Max
305
-
1.1
25
4.0
96
+55°C*
95%
+85°C
12 AWG/
3.31 mm
2
2
40 ft./12.1m
40 ft./12.1m
40 ft./12.1m
SIGN112-R112612

Advertisement

loading