Download Print this page

Power Supply Specifications - GE Tetra GEPS12-180U Installation Manual

Ge tetra geps12-180u led systems power supply

Advertisement

NOTE: For installation in Canada, a disconnect/toggle switch of appropriate rating needs to be placed within 29.5 feet (9 meters) of
primary side of the power supply. The minimum rating of the switch must be either 120 or 220 Volts AC. The switch must also support
twice the amount of input current.
NOTE: When installing power supply, connect to the appropriate sized building breaker or disconnect device for line, neutral and
ground connections, in accordance with National Electric Code (NEC) Article 600 and all local regulations.
NOTE: Exceeding maximum load per bank will cause the power supply to shut down. Once the excess load is removed, cycle the input
power to restart the power supply.

Power Supply Specifications

Performance Data
Input Voltage (VAC)
Input Frequency (Hz)
Input Current (A)
Output Voltage (VDC)
Output Current (ADC)
Output Power (W)
Environmental Operating Temperature Range
Environmental Humidity (non-condensing)
Environmental Storage Temperature Range
Environmental Rating
Dimensions
Supports
Tetra
Products
SKUs
Tetra
GEWHMMTS8, GEWWMMTS8-50K,
miniMAX
GEWWMMTS8-41K, GEWWMMTS8
GEBLMMS5, GEGLMMS5,
GERDMMS5
Tetra MAX
GEWHMXTS6, GEWWMXTS6-50K,
GEWWMXTS6-41K, GEWWMXTS6
GEWHMHTS6, GEWWMHTS6-50K,
GEWWMHTS6-41K, GEWWMHTS6
GEBLMXWA5, GEGLMXWA5,
GERDMXWA5
GERCMXWA6, GEYGMXS6
GERCMXWL6
GERDMXWL6
Tetra
GEWHPMTL5, GEWWPMTL5-50K,
PowerMAX
GEWWPMTL5-41K, GEWWPMTL5
Tetra
GEWHSSPS3, GEWWSSPS3-50K,
PowerStrip
GEWWSSPS3-41K, GEWWSSPS3
Tetra
GEWHBSP3, GEWWBSP3-50K,
miniStrip
GEWWBSP3-41K, GEWWBSP3
Conforms to the following standards:
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Tetra is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
Min
90
-
0.70
11.64
-
-
-40°C
10%
-40°C
12 in. x 2.7 in. x 1.6 in. (305 mm x 68 mm x 40 mm)
Maximum Load
per Power Supply
150 modules/60 ft. (18.29 m) per bank;
450 modules/180 ft. (54.88 m) per PS
90 modules/36 ft. (10.97 m) per bank;
270 modules/108 ft. (32.93 m) per PS
120 modules/60 ft. (18.29 m) per bank;
360 modules/180 ft. (54.88 m) per PS
80 modules/40 ft. (12.20 m) per bank;
240 modules/120 ft. (36.59 m) per PS
135 modules/54 ft. (16.46 m) per bank;
405 modules/162 ft. (49.39 m) per PS
162 modules/54 ft. (16.46 m) per bank;
486 modules/162 ft. (49.39 m) per PS
160 modules/80 ft. (24.38 m) per bank;
480 modules/240 ft. (73.17 m) per PS
140 modules/70 ft. (21.34 m) per bank;
420 modules/210 ft. (64.02 m) per PS
38 modules/25 ft. (7.62 m) per bank;
114 modules/75 ft. (22.87 m) per PS
16 modules/17 ft. (5.18 m) per bank;
48 modules/51 ft. (15.55 m) per PS
53 modules/53 ft. (16.16 m) per bank;
159 modules/159 ft. (48.48 m) per PS
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Typical
100-240
50/60
-
12.0
-
-
+25°C
-
-
IP66 rated: separate enclosure required
Remote Mounting Distance
18 AWG/
16 AWG/
0.82 mm
1.31 mm
2
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
30 ft./9.1 m
50 ft./15.2 m
20 ft./6.1 m
25 ft./7.6 m
20 ft./6.1 m
25 ft./7.6 m
Max
305
-
2.50
12.32
5.0
180
+60°C*
90%
+85°C
*Maximum case temperature is 80°C
14 AWG/
12 AWG/
2.08 mm
3.31 mm
2
2
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
80 ft./24.4 m
120 ft./36.6 m
35 ft./10.6 m
40 ft./12.1 m
35 ft./10.6 m
40 ft./12.1 m
SIGN090-012412
2

Advertisement

loading