Download Print this page

Electrical Safety - Anvil COA4003 Installation, Operation And Care Manual

Advertisement

LINE DIAGRAM
MODEL CODE: COA4003
7

ELECTRICAL SAFETY

1.
When this unit is to be positioned in close proximity to a wall,
partitions, kitchen furniture, decorative finishes, etc. it is
recommended that they be made of non-combustible material.
If not, they shall be clad with a suitable non-combustible heat
insulating material, and the closest attention be paid to fire
prevention regulations.
2.
Ensure that the equipment and the power supply cord does not
come into contact with hot surfaces.
3.
Supervision is necessary when the appliance is used in close
proximity to children.
4.
Use only earthed outlets matching the serial plate voltage.
5.
Have equipment installed by a qualified personnel in accordance
with local codes and ordinances.
6.
Use equipment in a flat level position.
7.
Do not operate unattended
8.
Do not operate if equipment has been damaged or is
malfunctioning in any way.
9.
These ovens are designed to run only on alternating current
(A.C.) DO NOT CONNECT TO DIRECT CURRENT (D.C)
DESCRIPTION OF MODELS
MODEL
DESCRIPTION
3 PLATE
COA4003
ELECTRIC OVEN
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical shock.
Do not use equipment if power cord is damaged or has been modified
OVEN
TOP PLATES
(W)
(W)
4500
13 500
WARNING
Electric Shock Hazard.
Keep water and other liquids from entering the inside
of the equipment. Liquid inside the equipment could
cause an electrical shock
4
TOTAL
(W)
18 000

Advertisement

loading