Marking A Position Using The Map Cursor; Marking A Position From A Map Object - Magellan 200 Reference Manual

Points of Interest

Marking a Position using the Map Cursor

This gives you a way of marking a position, other then your present position, by moving the
cursor around the map to a place you want to create a POI.
1. While viewing the Map screen, use the Arrow joystick to put the eXplorist into
Cursor mode.
2. Continue moving the crosshair cursor until you are over the location where you want
to add a POI.
3. Press MARK.
4. [Optional] Use the Arrow joystick to highlight fields (icon, name, etc.) of the POI
that you want to edit. When you are done editing the field, press ENTER.
With Save highlighted, press ENTER.
5.
6. Press ESC to exit the Cursor mode and return to the Position mode.

Marking a Position from a Map Object

Another method of marking a position while in the Cursor mode, is to use the crosshair cursor
to mark a map object (road, city, etc.).
1. While viewing the Map screen, use the Arrow joystick to put the eXplorist into
Cursor mode.
2. Continue moving the crosshair cursor until you are over a map object you want to
add as a POI. (The information about the map object will be displayed at the
bottom of the display.
3. Press ENTER.
4. Use the Arrow joystick to select from the list of map objects for that location the
one you want to use as the baseline for the new POI.
5. Press ENTER.
The Save option will be highlighted.
6.
7. Press ENTER.
8. [Optional] Use the Arrow joystick to highlight fields (icon, name, etc.) of the POI
that you want to edit. When you are done editing the field, press ENTER.
With Save highlighted, press ENTER.
9.
10. Press ESC to exit the Cursor mode and return to the Position mode.
28