Text Management Interface - Texas Memory Systems RamSan-300/320 User Manual

↓
3.1.1 Front Panel menu system layout
The following details the menu system of the front panel display:
Main Menu

3.2 Text Management Interface

The RamSan's management port allows you to manage, configure, and
monitor system behavior.
You may connect to the management port with either a DB-9 serial cable
or an RJ-45 Ethernet cable.
3.2.1 Connecting using a terminal program
To connect to the RamSan using a serial port connection, use a
dumb terminal or a terminal emulation program such as Windows™
HyperTerminal. Set your baud rate to 9600 with 8 data bits, 1
stop bit, no parity, and no flow control.
RamSan-300/320 User's Manual
The "↓" button scrolls down through the menu. The "↓" button
is also used confirm certain commands, as indicated on the
display. If the menu is not selected, this button is disabled.
Ethernet Setup
Show Current Config
Set IP Config
Static
IP
Subnet Mask
Gateway
DHCP
None
No Change (Exit)
Restart Network
Exit Menu
Active Monitor Mode/Deactivate Monitor
Manual Shutdown
Power off system?
LED Display
Set LED Mode
Display Bandwidth
Display IOPS
Performance Demo
LED Test Pattern
Disable LEDs
Exit Menu
Set LED Brightness
LED Brightness [Level]
Exit Menu
Display logo
Exit Menu
- 14 -