Chapter 7 Fibre Channel Controller Configuration; Changing Fibre Channel Topology And Link Speed - Texas Memory Systems RamSan-300/320 User Manual

Chapter 7
Controller Configuration
The RamSan allows the user to select the topology, link speed, and
failover options for the Fibre Channel Controllers. RamSan supports Point-
to-Point and Arbitrated loop topologies and can auto-detect the topology.
It supports 1- and 2-Gbit link speeds and can auto-detect the speed.
When more than one Fibre Channel Controller is installed, the controllers
can be set to back each other up. The following two sections provide
additional details.

7.1 Changing Fibre Channel topology and link speed

Via Web Interface
To change the Fibre Channel topology and link speed via the web
interface:
•
•
•
•
RamSan-300/320 User's Manual
Fibre Channel
Click on the "Fibre Channel Controller" graphic.
Click on the "Controller Setup" tab.
Select from the "Topology" and "Link Speed" settings.
Click the "Save" button.
Figure 7-1: Controller Setup via Web Interface
- 70 -