Advertisement
Tool Description
Screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Unscrew the screws on mounting angle 1, and then remove mounting angle 1.
2. Remove the cover 2.
3. Remove all of the inner cables.
4. Unscrew the screws on PCB 3, and then remove PCB 3.
5. Unscrew the screws on PCB 7, and then remove PCB 7.
6. Remove film 5 from panel 2.
7. Remove all of the labels.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
Figure1 Remove mounting angle
Tool Size (if
applicable)
2#
Page 2
Advertisement
