Attaching X-Light V2 - crest Optics X-Light V2 TP Installation And User Manual

TP

2.4 Attaching X-LIGHT V2

to the microscope
You will need the specific microscope brand side-port C-mount (1x) adapter in order to attach the X-LIGHT
TP
V2 . (see figure; Nikon adapter example).
Mount the side port-adapter on the C-Mount side-port ring
Place the adapter in its housing (disk box side) and the screw the threaded ring to block it in position
Mount the Confocal head to the side port (camera port) of the microscope. It is important that the confocal
head is parallel to the side port of the microscope. This is achieved by leveling the confocal head adjustable
feet. Place the bubble level provided, on the stage of the microscope and note the position of the bubble.
Now place the bubble on the top flat surface of the confocal head and adjust the feet until the bubble
23