Product Description; Before Initial Use; Boil-Dry Protection - Clas Ohlson 18-4710-1 Instruction Manual

Product description

1. Lid
2. Handle
3. Power switch
4. Base
5. Water level indicator
6. Housing
7. Filter

Before initial use

Before using the kettle you should boil two kettles of water in it in order to rinse it of
any residue. Never boil the kettle when it contains water mixed with washing-up liquid
or other detergents.
Operating instructions
• Make sure that the spout filter is fitted securely.
• Open the kettle by lifting the lid straight up and then fill the kettle with cold water.
Do not fill the jug above the max level mark.
• Close the lid.
• Connect the mains lead to a earthed wall socket.
• Place the kettle on the base and set the power switch to I. The power indicator
light will come on to indicate that the kettle is switched on.
• The kettle turns off automatically and the indicator lamp goes out once the water
has boiled. The switch returns to the 0 position.
Note: Never turn the kettle on when it is empty.

Boil-dry protection

If you should turn on the kettle while it is empty the boil-dry protection will activate and
automatically turn off the kettle. Let the kettle cool before attempting to use it again.
1
7
6
5
5
2
3
4