Cleaning The Surface Of The Filter (Fig S); Replacing The Filter - Philips AC3055 User Manual

1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig c)�
3
Clean the particle sensor with a damp cotton swab (fig r)�
4
Dry all parts thoroughly with a dry cotton swab�
5
Reattach the back cover (fig g)�

Cleaning the surface of the filter (Fig s)

Filter alert light status
The filter cleaning alert
the screen�
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig c)�
3
Pull the filter from the appliance (fig u)�
4
Clean the surface of the filter with a vacumm (fig t)�
5
Put the filter back into the appliance (fig f)�
6
Reattach the back cover� (fig g)
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
reset the filter cleaning time�
10
Wash your hands thoroughly after cleaning the filter�

Replacing the filter

Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure
that the air purification filter is in optimal condition when the air purifier is
operating� When the filter need to be replaced, the filter replacement alert
lights up red�
If the filter is not replaced in time, the air purifier will stop operating and
automatically lock to protect the air quality in the room� Replace the filter as
soon as possible�
Action
Clean the surface of the filter with a
displays on
vacumm�
for 3 seconds to
EN
11