Filter Reset - Philips AC3055 User Manual

Replacing the filter
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before
replacing the filter�
Filter alert light status
The filter replacement alert
lights up (fig v)
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig c)�
3
Pull the filter from the appliance (fig d)�
4
Remove all packaging materials of the new filter (fig e)�
5
Put the new filter into the appliance (fig f)�
6
Reattach the back cover (fig g)�
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
reset the filter lifetime counter�
10
Wash your hands thoroughly after replacing the filter�
Note: Do not smell the filter as it has collected pollutants from the air�

Filter reset

You can replace the filter even before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Touch the power
unplug from power socket�
2
Put the power plug in the power socket�
3
Within 15 seconds after power on, touch and hold
3 seconds to reset the filter lifetime counter (fig w)�
EN
12
Action
Replace the NanoProtect filter Series 3
(FY3430/30)
button for 3 seconds to turn off the appliance and
for 3 seconds to
) displays on
and button for