Texas Instruments TravelMate 3000 WinSX User Manual page 165

Troubleshooting
E-4 Troubleshooting
Special functions do
not work (Setup, Alt-
Ctrl-Esc, speed control
keys)
The unit starts up but
a message indicates
that a power-up test
has failed.
Embedded numeric
keypad does not work.
Optional Numeric
Keypad does not work.
Amber indicator on
the AC Adapter does
not come on, but
green indicator is on.
Green indicator on AC
Adapter does not come
on.
Application program overrid-
ing computer BIOS interrupts
- Contact your application
program provider.
TravelMate 3000 WinSX
hardware-Turn the unit off,
wait 5 seconds, then turn
unit on again. If the same
message appears, check
against the list of power-up
error messages in the next
section and, if necessary,
make a note of the message
and contact your Texas In-
struments reseller.
Setup Program setting--Check
the settings on the Setup Pro-
gram (see Chapter 4).
Embedded numeric keypad
is automatically disabled
when the optional Numeric
Keypad is installed.
Check thumb screw and con-
nectors for good fit, then
reboot the computer.
No internal battery pack is
installed or battery pack is
fully charged.
No ac power--Check wall out-
let, plugs, and AC Adapter
connectors.