Troubleshooting Tips
Computer does not
come on when
power switch is in
the On position
Computer power is
on but screen is
blank
Special functions
(Setup, Alt-Ctrl-Esc,
Alt-Ctrl- , etc.) do
not work
Computer
indicates an error
at start-up
External PS/2
mouse does not
function
Feedback
V
Low battery: use AC Adapter and recharge battery.
V
Ensure AC Adapter cable and power cord are
securely connected.
V
Connect AC Adapter to another outlet.
V
Adjust contrast switch.
V
Press Shift to take the computer out of auto-suspend
mode.
V
Press Standby to take the computer out of standby
V
mode.
Computer set for external monitor; cycle power or use
VGA/LCD command.
V
Application is overriding computer BIOS interrupts;
V
notify your application provider.
Computer model does not support special function,
for example, DX4/75 models do not support Alt-
Ctrl- .
V
Turn the computer off: wait several seconds; then turn
the computer on again. If error persists, check list of
error messages for corrective action. Press Ctrl-Alt-
ESC to ensure all settings are correct.
V
Ensure that the keyboard switch is in the down
position.
V
When recording using the internal microphone. select
Mute within Pocket Mixer prior to recording to
eliminate feedback from the internal speaker.