Installing Extra Ram - Texas Instruments TravelMate 4000M User Manual

Installing Extra RAM

Your computer is equipped with 4 MB of random access memory (RAM). You
can increase memory by installing one of the RAM options:
T
4 MB RAM Expansion Board (TI Part No. 9793357-0001). This
expands RAM from 4 MB to 8 MB.
T
16 MB RAM Expansion Board (TI Part No. 9793358-0001). This
expands RAM from 4 MB to 20 MB.
To install optional 4 or 16 MB RAM boards, complete the following steps:
Caution: Prevent component damage caused by electrostatic discharge
(ESD). Use a high-impedance, grounded-conductive floor mat or wrist
strap to prevent ESD. Before touching the Integrated circuit devices,
discharge static electricity from your hands, tools, and containers by
touching them to a grounded surface.
1. Turn off the notebook, unplug the AC Adapter, and remove the battery
pack.
2. Turn the notebook upside down on a padded surface.
3. Remove the screw and plastic cover from the RAM expansion
compartment. (Seethe following figure.) Set the screw and cover aside
temporarily.
1-22