Base Station Installation - Snom M100 KLE Quick Installation Manual

Base Station Installation

This section assumes that your network infrastructure is established and that your
IP PBX phone service has been ordered and configured for your location.
For more information about IP PBX configuration, see the
M100 KLE SIP DECT 4-Line Base Station Administrator and Provisioning Manual
You can power the base station using the supplied power adapter or using Power over
Ethernet (PoE) from your network. (The base station requires PoE Class 2.)
If you are not using PoE, install the base station near a power outlet not controlled by a
wall switch. The base station can be placed on a flat surface or mounted on a wall in a
vertical or horizontal orientation.
Avoid placing the base station too close to:
• Communication devices such as television sets, DVD players, or other cordless
telephones
• Excessive heat sources
• Noise sources such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting
• Excessive dust sources such as a workshop or garage
• Excessive moisture
• Extremely low temperature
• Mechanical vibration or shock such as on top of a washing machine or work bench
Note: For cordless accessory installation, see the M10 KLE SIP DECT 4-Line Handset
Quick Installation Guide and the M18 KLE SIP DECT 4-Line Deskset Quick
Installation Guide.
10
.