Insignia NS-BBBT20 User Manual page 15

Reconnecting to a paired device
When your boombox is not paired to a device, the LED indicator blinks slowly.
When you select BT mode, your boombox automatically connects to a previously
paired device. If it fails to connect, "BT" keeps blinking.
Your boombox loses the Bluetooth
connection if you...
Turn it off.
Move the Bluetooth device out of
range.
Turn off your Bluetooth device.
Turn off Bluetooth on your Bluetooth
device.
Connect your Bluetooth device to
another Bluetooth device.
Change your boombox's input source Change the boombox's input source back to
Note: If a device does not automatically reconnect, you may need to reselect
"NS-BBBT20" on your Bluetooth device.
Connecting to a different device
On your Bluetooth device, turn off the Bluetooth function or unpair
1
the boombox in your Bluetooth device list. The boombox can now be
connected to another Bluetooth device.
Follow the section Pairing your devices on page 14 to connect a new
2
device.
Receiving a phone call while playing music
• When you receive a call while playing music through your phone, the
music stops automatically.
• When you hang up, depending on the setting of your phone, the
current track may resume playback.
Multi-Function Stereo Boombox with Bluetooth
To reconnect...
Turn on your boombox. Your boombox
searches for the last connected Bluetooth
device and reconnects.
Move your Bluetooth device within 33 ft. (10
m) of your boombox.
Turn on your Bluetooth device, then make
sure that Bluetooth is on.
Turn on Bluetooth on your Bluetooth device.
Disconnect your Bluetooth device from the
other Bluetooth device, then set your device
to pairing mode. Select "NS-BBBT20" on your
Bluetooth device.
Bluetooth.
www.insigniaproducts.com 15